What points should be paid attention to during the construction of rock wool board?

Although rock wool composite board is a new type of building material, after entering the market, it has attracted the attention of many users by virtue of its own advantages. Although the rock wool composite board has many advantages, in the actual application process, in order to give full play to the role of the rock wool composite board, many details need to be paid attention to in the construction process. In order to help you in the correct and reasonable construction and application of rock wool composite panels, our company will summarize our understanding of rock wool composite panels over the years, and summarize and introduce the construction points of rock wool composite panels.

图片1

1. The facilities and air ducts required for heating should have no leakage, and the surface should be dry and grease-free. Under these conditions, it will not rust and build up, which is good for corrosion. The coating can be appropriate.

 

2. In order to greatly reduce the heat loss of the connectors, panels and felts for various purposes, they must be very close to the bridge abutment. When the respective cross-layer insulation joints should be staggered to avoid thermal bridges and prevent cold bridges from being cold .

 

3.The rock wool composite board is suitable for outdoor use or parts that are prone to mechanical wear such as metal or plastic sheaths. Pay attention to the sealing of the joints and joints. If necessary, sealant can be added. The sealing layer of the overlapping part is not Less than 100mm.

 

4. The cold vapor barrier must be protected when it is cold. At low temperatures, the rock wool composite board has no resin for heat insulation, and the moisture-proof layer is fireproof.

 

5. When the temperature exceeds 200℃, keep a proper outer sheath to add, so that it is impossible for expansion to change the thickness and bulk density.

6.For large-diameter equipment flat wall or rock wool insulation board products, insulation nails above 200℃ should be added, and the outer sheath should be tightly aligned (spacing 400mm).

7.When the insulation object is placed vertically, it has a considerable height, and the insulation layer must have positioning pins or bearing rings, and the spacing should not exceed 3 meters to prevent the insulation material from sliding down during vibration.

 

Due to the limited time, the main points of the construction of the rock wool composite board are here. I hope this information can provide you with some help. When applying the rock wool composite board, you can use correct construction and pay attention to the details in the construction process. In addition to ensuring the installation effect of the rock wool composite board, it can also give full play to the role of the rock wool composite board to achieve the desired application effect. If you need to buy and install rock wool composite board, please contact our company.


Post time: Apr-14-2021